How To Choose The Best Router Bit For Plywood

Not all random sugar shakers are good enough to serve you make fulfill your desire. In fact, there are several types of sugar shakers available in the market. But, if you are looking for the best one, then you should choose something that came from a well-known company and have decent customer reviews.

Along with reading the features of the best sugar shakers and what makes them great, what are the customer feedbacks for an individual product? Let’s learn them and read.

Best Overall
Yonico Router Bits Set Dado Straight Bit Undersize Plywood 3 Bit 1/4-Inch Shank 14323q
Yonico Router Bits Set Dado Straight Bit Undersize Plywood 3 Bit 1/4-Inch Shank 14323q
$23.95
Editor's Choice
Lit Freud 89-650 Undersized Plywood Router Bit Set with 1/2" Shanks (4 Piece), Perma-SHIELD Coating Red, 3 x 9 x 5 inches
Lit Freud 89-650 Undersized Plywood Router Bit Set with 1/2" Shanks (4 Piece), Perma-SHIELD Coating Red, 3 x 9 x 5 inches
$74.21
Nice Pick
Whiteside Router Bits 470 Undersize Plywood Dado 3 Piece Set with 7/32-Inch,15/32-Inch, and 23/32-Inch Cutting Diameter with 1/2-Inch Shank
Whiteside Router Bits 470 Undersize Plywood Dado 3 Piece Set with 7/32-Inch,15/32-Inch, and 23/32-Inch Cutting Diameter with 1/2-Inch Shank
$61.87

Top 10 Best Router Bit For Plywood

Here are the top router bit for plywood we picked, check their features.
router bit for plywood

1. Whiteside Router Bits 470 Undersize Plywood Dado 3 Piece Set with 7/32-Inch,15/32-Inch, and 23/32-Inch Cutting Diameter with 1/2-Inch Shank

Whiteside Router Bits 470 Undersize Plywood Dado 3 Piece Set with 7/32-Inch,15/32-Inch, and 23/32-Inch Cutting Diameter with 1/2-Inch Shank

  • Whiteside Router Bits are made with Premium Carbide
  • Precision ground for proper balance at high RPM
  • Industrial Quality

2. Yonico Router Bits Set Dado Straight Bit Undersize Plywood 3 Bit 1/4-Inch Shank 14323q

Yonico Router Bits Set Dado Straight Bit Undersize Plywood 3 Bit 1/4-Inch Shank 14323q

  • Route dados and straight cuts sized to receive dressed plywood
  • Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge
  • For use on CNC, table mount and handheld routers
  • Silver induction brazing for maximum strength and durability

3. BOSCH 84602MC 23/32 In. x 3/4 In. Carbide-Tipped Plywood Mortising Router Bit

BOSCH 84602MC 23/32 In. x 3/4 In. Carbide-Tipped Plywood Mortising Router Bit

  • Micrograin carbide-tip router bit design – ensures consistently smooth finish cuts, with superior wear resistance
  • Tight-fitting plywood-mortise joints – designed with undersized cut diameters to match up to the actual thickness of standard plywood
  • Made for standard-size plywood – creates cutting diameter to match thickness of 3/4 In. plywood
  • Reinforced shanks – feature fully hardened and tempered steel shanks that provide ultimate durability
  • Upgraded micrograin carbide – engineered for precise cuts and for long bit life

4. Tongue and Groove Router Bits Set, ZOKMOK Plus 3 Teeth Adjustable T Shape Router Bits Set, 1/2” Shank, 1/4” Cutter

Tongue and Groove Router Bits Set, ZOKMOK Plus 3 Teeth Adjustable T Shape Router Bits Set, 1/2

  • 😀Anti-kickback Design – These woodworking tools feature their clever anti-kickback design ensuring a secure installation that can withstand some heavy use and the test of time.
  • 😀 Stable and Safe – The 1/4″ shank bit provides greater stability and less vibration during use. The short clamping of this product may cause bending.
  • 😀 Widely Used – These tongue and groove cutter sets are truly versatile. For wood, MDF, particleboard, plywood compact panels. Do not cut ferrous metals and non-wood materials such as: steel, iron, sand, etc.
  • 😀 Easy to Storage – The plastic soft case is sturdy and easy to store, this case also protects these tongue and groove bits on DIY home or outdoor working.
  • 😀 Convenient Service – We provide 100% satisfactory service, if you have any problem with this set, please feel free to contact us

5. Freud 4 Piece Undersized Plywood Bit Set (1/2″ Shank) (89-650) Perma-SHIELD Coating Red

Freud 4 Piece Undersized Plywood Bit Set (1/2" Shank) (89-650) Perma-SHIELD Coating Red

  • Set comes in Freud’s unique shadow box case that can hang on the wall or mount on the bench to keep bits handy and safe.
  • Cuts all composition materials, plywood’s, hardwoods, and softwoods.
  • Use on hand-held and table-mounted portable routers.
  • Set comes in Freud’s unique shadow box case that can hang on the wall or mount on the bench to keep bits handy and safe
  • Cuts all composition materials, plywoods, hardwoods, and softwoods
  • Use on hand-held and table-mounted portable routers

6. Freud 23/32″ (Dia.) Double Flute Straight Bit with 1/2″ Shank (12-150)

Freud 23/32" (Dia.) Double Flute Straight Bit with 1/2" Shank (12-150)

  • Cuts all composite materials, plywoods, hardwoods, and softwoods.
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
  • Kickback reducing design
  • Individually computer balanced
  • Precision ground for the smoothest cuts
  • Covered by Freud’s limited lifetime warranty

Reviews from Real Users

S. Fannin

I use this almost exclusively to cut slots in small shelves. Like for a fastener or a lectern book sliding stopper or perhaps something adjustable. I could use the 1/4" straight bit that came in a set of various bits costing about what this one bit costs. So why would I buy this? Well, it cuts far more accurately. You can see by eye even that the slot is kind of perfect. The 1/2" shank transfers more power for any brand, but it's still a feature. The cutter goes straight and it doesn't care if it suddenly hits where a branch was in hardwood or an odd spot in something, that just disappears. That's where the "free" or "multi-pack" one fails. Something a little off and it wobbles and maybe you can see it, or the board moves a little, or the slot height is uneven, or even some little bits fly out, all of which leave the slot looking crummy. So being frugal I might very well use cheap bits sometimes where the holes will be invisible or I'm just doing some random chopping. But for finishing stuff that the end user will see, you need to use a specialty "premium" bit. For me that's usually Freud bits because I get consistently good results with them. And again, not saying your whole set needs to be these--they're not cheap. But even for a hobbyist who can't pass on the cost, the ones you really like and use frequently should be Freud.

Amazon Junkie

Razor sharp as expected. High quality Freud tool. I see reviews here from people who used this for something other than what it is intended for- mortising, edge trimming etc.

This 15/32" bit is used to cut perfectly sized dados for 12mm offshore plywood. I buy "1/2 inch birch plywood, finished one side" at a great price from the lumber supply, but it is not 1/2" it is 0.46", or 12mm. Using a standard 1/2" bit to route dados for cabinet making etc makes a dado that is way too big, loose and sloppy. You can also get what is marketed as a bit specifically for undersized offshore plywood, but it is 31/64ths which is very close, but still makes a groove a little too wide (1/64th) if you do precision work. The 31/64" groove will fit together easily with that extra room but does not look good.
If you use 12mm plywood and can route a perfectly straight dado, this is the one you want. You'll need to use a clamp to pop the joint together but with no slop or shadow line. For a particularly difficult joint, I'll sand the edges of the panel going into the dado slightly and it slides right in.

Dustin

So far so good. Used to make a prototype mortise and tenon with a plunge router, bushing guide set, this bit, along with a template i made outta birch ply. Tenon is 1 1/2" long and this bit handled the deep end grain cut easily and accurately. I hope it lasts for about 25 more joints at least and i'll consider it worth the money. If It doesn't, i'll edit the post.

7. BOSCH 84603M 23/32 In. x 1-1/4 In. Carbide Tipped Plywood Mortising Bit

BOSCH 84603M 23/32 In. x 1-1/4 In. Carbide Tipped Plywood Mortising Bit

  • Creates cutting diameter to match thickness of 3/4 In. plywood
  • Produces a tight fit when mortising standard plywood
  • Balanced cutting with minimal vibration
  • Micrograin carbide tips provide superior wear resistance and long life

8. Whiteside Router Bits 1083A Straight Bit with 23/32-Inch Cutting Diameter and 1-Inch Cutting Length

Whiteside Router Bits 1083A Straight Bit with 23/32-Inch Cutting Diameter and 1-Inch Cutting Length

  • 1083A
  • Straight Bit
  • Industrial Quality

9. Flytuo Straight Dado Cut Router Bit 1/2 Shank, 3PCS Double Flute Plywood Straight Cut Router Bit Set for Create Groove, Dado with Diameter 1/4″, 3/

Flytuo Straight Dado Cut Router Bit 1/2 Shank, 3PCS Double Flute Plywood Straight Cut Router Bit Set for Create Groove, Dado with Diameter 1/4", 3/8", 1/2"

  • Product Size: Shank Size: 3pcs 1/2″ shank straight router bit set; Cutting Diameter: 1/4″, 3/8″, 1/2″; Cutting Depth(Approx.): 1″,1″,1″
  • Neat&Precision Cuts Every Time: 1/2 inch shank straight cut router bit set is ideal flush trim router bit for fast smooth and accurate trimming cuts for laminates and template work, totally enclosed and lubricated
  • Premium Material: High-quality alloy steel bodies with C3 micro-grain tungsten carbide blades with Heat resistant Teflon coating. C3 Micro-grain tungsten carbide cutters with Anti-Kickback design for maximum strength and durability
  • Wide Application: These straight cut router bits, variety of sizes to cut different thicknesses and depths of solid wood, density boards, MDF, chipboard, splint, and more. Please avoid cutting metal and non-wood materials
  • The Straight Cut Router Bits is packed in a plastic box for easy storage and carry. Flytuo aims to provide high-grade products and customer service to all customers. Any problems, just contact us and our after-sale team will solve your problems. Thanks

10. Freud 1/2″ (Dia.) Bearing Flush Trim Bit with 1/4″ Shank (42-104)

Freud 1/2" (Dia.) Bearing Flush Trim Bit with 1/4" Shank (42-104)

  • Overall Dia. (D) 1/2″, Bearing Dia. 1/2″, Carbide Height (h) 1″, 2 Flute(s), 1/4″ Shank
  • Cuts all composition materials, plywoods, hardwoods, and softwoods.
  • Use on portable or table-mounted routers.

Reviews from Real Users

S Eckert

I use this to trim Wilsonart laminate to plywood edges in a Sprinter I built into an RV. I went overboard, laminating both sides of many panels. After about 6 large sheets it is showing some wear. I learned to squirt it with WD40 before and after each job, because that loosens the contact cement I used for the laminate. If the bearing stops spinning, you'll burn the wood.

Eric

Look. . . I'm not the best woodworker in the world. I built a cabinet and it ended up being about an 1/8th inch out of square. Not enough to have to redo it, but, the slight overhang of the top and the door were eyesores. So, I ordered this and bing, bang boom, within about 30 seconds, no one was any wiser. I know that is the not the intended purpose, but it worked for me. In the future, I will be better about ripping plywood straight with a circular saw than trying to rip it on my table saw!

Anyway, this bit saved me!!!

WLBonfiglio

Well made tool with great potential for trim work. I bout this for a special project, and it is great for the need for 1:1 trimming of wood in my project. The bearing is made accurate and I can rely on it to give me the accurate trim using a template or trimming the edge of my projects wood edge. Definite need for every router. The item I received had a different model number, 42-10425 instead of 42-104, I was informed that the item received is the same. Both numbers represent the same tool, only a change in the numbering system not the construction of the tool. It has a fair price and most of all a reliable manufacturer. Freud is a name that can be trusted and is reliable. This router bit is a great example of it.

Final Note

After researching tons of sugar shakers available on different marketplaces like Amazon, eBay, and others we picked these top products and gathered detailed verified real-time users review. Hope now you know about this product’s pros cons features and everything.

Don’t make a quick decision but Don’t be overwhelmed with information. Good day.